Black FR Zip Up Hoodie with HIVIS Striping
Black FR Zip Up Hoodie with HIVIS Striping
$199.99
The Enhanced Visibility zip up hooded sweatshirt is built just like your favorite sweatshirt except better. We start with continuous ribbed cuffs and waist, a dielectric coil zip closure, and two front hand warmers. A 3 piece lined hood is soft, warm and works with hard hats. Striped with YSY (Yellow-Silver-Yellow Striping)
FEATURES
Made by Benchmark FR in the United States using Fleece Blend 50% Modacrylic 50% Cotton fabric
Front Hand-Warmer Pockets
Excellent stretch and recovery
Less than 5% shrinkage with wash
Skin Safe
COMPLIANCE
Made by Benchmark FR in the United States using Benchmark FR Fleece Blend 50% Modacrylic 50% Cotton fabric.
This item meets the performance specification ASTM F1506-18 which is the Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Arcs. This specification is called out in OSHA 1910.269, NFPA 70E and CSA Z462.
This clothing item is UL Certified and meets the requirements of NFPA 2112-2018. It is considered flame resistant clothing for protection against short term duration thermal exposure from fire in accordance with NFPA 2112-2018. Note that NFPA 2113 requires upper and lower body coverage.
Meets NFPA 70E: Standard for Electrical Safety in the Workplace. Arc Flash PPE Category 2 or “CAT 2” with an Arc Rating (EBT) = 19 cal/cm2
This garment is constructed from arc and flame resistant fabric and components in a facility with audited quality controls. It will resist ignition and not continue to burn when the ignition source is removed. This garment is not intended for fire fighting activities and provides no protection from chemical exposure. This garment will maintain its flame resistant properties for the life of the garment provided wash and care instructions are followed.
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 19 × 14.5 × 1.5 in |
| SIZE | 3XL, Large-Tall, XL-Tall, 2XLT |
