Black FR Hooded Pullover

Black FR Hooded Pullover


Hoodies may shrink up to 5% after first wash – order true to size

Our FR hooded sweatshirt is constructed like your favorite ‘hoodie’ with a generous fit, large hand warmer, and a lined drawstring hood.

Unlike other flame resistant sweatshirts, our FR hoodie is one you will actually want to wear. It is safe to wear against the skin and it is very soft. You can’t tell it from a non-FR sweatshirt. Reinforced stitching on the corners and stress points increases durability.

The inner face of our knit fabric is fleeced-lined, so you stay warm and comfortable in the cold.. For added warmth, the sweatshirt can be part of a layering system for greater insulation.

Jacket Test Report

SKU: 3026FRBK Category:


Made by Benchmark FR in the United States using Fleece Blend 50% Modacrylic 50% Cotton fabric
Front Kangaroo Pocket
Excellent stretch and recovery
Less than 5% shrinkage with wash
Skin Safe
Reinforced stitching on the corners and stress points



UL Classified to NFPA 2112-2018
Meets NFPA 70E requirements
Arc Rating (EBT) = 19 cal/cm2
OSHA 1910.269
OSHA 1910.960
Meets ASTM F1506
NESC 2012
Individual Serial number

Made by Benchmark FR in the United States using Benchmark FR Fleece Blend 50% Modacrylic 50% Cotton fabric.

This item meets the performance specification ASTM F1506-18 which is the Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Arcs. This specification is called out in OSHA 1910.269, NFPA 70E and CSA Z462.

This clothing item is UL Certified and meets the requirements of NFPA 2112-2018. It is considered flame resistant clothing for protection against short term duration thermal exposure from fire in accordance with NFPA 2112-2018. Note that NFPA 2113 requires upper and lower body coverage.

Meets NFPA 70E: Standard for Electrical Safety in the Workplace. Arc Flash PPE Category 2 or “CAT 2” with an Arc Rating (ATPV) = 19 cal/cm2

This garment is constructed from arc and flame resistant fabric and components in a facility with audited quality controls. It will resist ignition and not continue to burn when the ignition source is removed. This garment is not intended for fire fighting activities and provides no protection from chemical exposure. This garment will maintain its flame resistant properties for the life of the garment provided wash and care instructions are followed.


Additional information

Weight 2 lbs
Dimensions 19 × 14.5 × 1.5 in

S, M, 5XL, Large-Tall