FEATURES

Made by Benchmark FR in the United States using inherent arc and flame resistant denim
Stretchable fabric
Classic Jean Styling
Dielectric Front Closure
Reinforced Belt Loops
Exceptional Colorfastness
Use 60% less water than treated FR jeans

COMPLIANCE

UL Classified to NFPA 2112-2018
Meets NFPA 70E requirements
Meets the requirements of ASTM F1506
Arc Rating (EBT) - 12 cal/cm2
HRC / CAT 2
OSHA 1910.269
OSHA 1910.960
Meets ASTM F1506
NESC 2012
Individual Serial Number
Made in the USA
Berry Compliant

Made by Benchmark FR in the United States using inherent arc and flame resistant stretch denim. The denim is 68% Cotton, 29% Modacrylic (Protex), 1% Lycra and 2% Secret fabric!

This item meets the performance specification ASTM F1506-18 which is the Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Arcs. This specification is called out in OSHA 1910.269, NFPA 70E and CSA Z462.
This clothing item is UL Certified and meets the requirements of NFPA 2112-2018. It is considered flame resistant clothing for protection against short term duration thermal exposure from fire in accordance with NFPA 2112-2018. Note that NFPA 2113 requires upper and lower body coverage.

Meets NFPA 70E: Standard for Electrical Safety in the Workplace. Arc Flash PPE Category 2 or “CAT 2” with an Arc Rating (EBT) = 12 cal/cm2
This garment is constructed from arc and flame resistant fabric and components in a facility with audited quality controls. It will resist ignition and not continue to burn when the ignition source is removed. This garment is not intended for fire-fighting activities and provides no protection from chemical exposure. This garment will maintain its flame resistant properties for the life of the garment provided wash and care instructions are followed.