FEATURES

Made by Benchmark FR using 100% Flame Resistant Cotton
6 Pockets & 2 Pass-thrus: Two Front Pockets and Two Back Pockets
Snap Cuff
Lay Flat Collar
Slight Elastic Waist
Non-Sparking Front Zipper
Reinforced Stress Points
Generous Fit
Outlast Typical Coveralls
Breathable & Comfortable
Multi-Hazard Protection
Worn Independently or Layered
Skin Safe

COMPLIANCE

UL Classified to NFPA 2112
Meets NFPA 70E requirements
Arc Rating (ATPV) - 8.6 cal/cm2
Black and Orange Shirts: ARC Rating (ATPV) - 8.9 cal/cm2
ARC / CAT 2
OSHA 1910.269
OSHA 1910.960
Meets ASTM F1506
NESC 2012
Individual Serial number

Made by Benchmark FR using 100% Flame Resistant Cotton.

This item meets the performance specification ASTM F1506-18 which is the Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Arcs. This specification is called out in OSHA 1910.269, NFPA 70E and CSA Z462.

This clothing item is UL Certified and meets the requirements of NFPA 2112-2018. It is considered flame resistant clothing for protection against short term duration thermal exposure from fire in accordance with NFPA 2112-2018. Note that NFPA 2113 requires upper and lower body coverage.

Meets NFPA 70E: Standard for Electrical Safety in the Workplace. Arc Flash PPE Category 2 or “CAT 2” with an Arc Rating (ATPV) = 8.6 cal/cm2

This garment is constructed from arc and flame resistant fabric and components in a facility with audited quality controls. It will resist ignition and not continue to burn when the ignition source is removed. This garment is not intended for fire fighting activities and provides no protection from chemical exposure. This garment will maintain its flame resistant properties for the life of the garment provided wash and care instructions are followed.

YSY Striping

PFAS Free